Multigas Analysis System CO + CO2 + H2O

The Multigas Analysis System Coltri is a measuring instrument capable of monitoring air quality. Its application includes continuous monitoring of environmental gases, hyperbaric chambers, safety, medical, and air quality.

Available sensors:

– Oxygen _O2

– Carbon dioxide _CO2

– Carbon monoxide CO

– Humidity_H2O

– Gas temperature

– Helium in the air

Choosing the SAM Multigas Analysis System cannot also install the Presec system.

General Specifications

Input voltage requirement	10-35 Vdc
Internal battery	Lithium-ion rechargeable battery. One cell 1400 mAh Li ion 3.7 V
Sensors	Up to 6 sensors
Output	Acoustic alarm
Serial connection	1 RS232 interface. Transmission speed up to 115000 baud, RS485 interface on request.
Measurement resolution	24-bit bipolar A/D converter. Drift in automatic temperature compensation
Conversion rate	10 ms
Sampling time	100 ms (min) for each channel
Signal measurement accuracy	0.1% Full scale +/- ½ LSB
Input device	Rotary knob with center push
Color display	TFT 320 x 240 dots resolution, LED backlighting
Display light intensity	600 nits (cd/m2)
Memory	Micro SD card writer/reader
Microprocessor	Cortex M4

AUDIBLE ALERT There is an audible warning alarm on board.

SERIAL INTERFACE Standard RS232 interface for connection to PC. you can read measurements remotely and program the instrument. software available on request is required.

NON-VOLATILE MEMORY SAM is equipped with nonvolatile memory that keeps configuration data and settings for 10 years without power.