Booster Indy VII

BOOSTER LINE.

Scroll Down

Booster medium pressure in a concentrate of power

Designed for the most demanding industrial settings, medium-pressure BOOSTER INDY VII takes compression of technical gases up to 40 bar to the next level.

With a suction pressure of 2 to 8 bar and a high-performance pumping unit, BOOSTER INDY VII provides a flow rate of 721 to 2,703 l/min, offering all the power needed for intensive and continuous work cycles.

It is available with 11 or 15 kW three-phase electric motor, and integrates an advanced electrical panel with automatic condensate drainage, automatic shutdown and automatic restart, for smooth, safe and autonomous operation.

Robust, efficient and ready to support the highest loads, INDY VII is the perfect synthesis of power and operational reliability.

Watch it closely

Simplicity comes as standard

Imagine having a compressor capable of great performance and endowed with extraordinary robustness. What would all this be without absolute simplicity in operating it? We believe that’s what innovation is for: to make it simpler.

And now for all the details

Medium pressure (40 bar) 4-stage pumping unit

Aluminum monoblock
Forced lubrication with low-pressure gear pump
Final safety valve
Pipes, fittings and nuts made of AISI 316 stainless steel
Die-cast aluminum connecting rods
Die-cast aluminum cylinders with nicasil barrel coating + cast iron cylinders
Stainless steel stage valves
Forged steel crankshaft
Roller Bearings for intensive work

Electric motor

One of the key parts of the compressor: the motor transfers motion to the pumping unit through the belt. Available on this model is the three-phase electric motor of 11 kW to 15kW.

Stand-alone filter system with Hyperfilter

The filter system, with activated carbon cartridge, is mounted on a stand-alone stand and includes:

Safety valve (variable according to customer’s request)
Pressure holding valve
Separator and filter kit Hyperfilter external
Leg kit
Automatic condensate drain. Removes water from the intermediate separator and the final separator automatically during operation (every 7 minutes).

Electrical cabinet

Motor protection switch.
Autostop + Autostart.
Drainage of the separator between individual stages during compressor operation (standard drainage interval every 15 minutes for a period of 6 seconds).
Interstage pressure gauges display the operating pressure for individual compression stages. This pressure information allows the tightness of the valves (inlet and outlet) of each stage to be checked and potential sources of failure to be quickly identified.

Interstage pressure gauges are mounted in the compressor frame.

Frame

Open frame made for easy maintenance and transportability. Tilting motor carrier plate ensures constant V-belt tension. Protective casing made of thermo-formed material channels cooling air over the cylinders and inter-stage pipes, ensuring high compression efficiency.

Control console equipped with inter-stage pressure gauges, internal temperature indicator, presence and wrong phase sequence alarm, oil shortage alarm, and run stop and manual condensate drain controls allow easy compressor operation and maintenance. Made of steel with scratch-resistant powder coating in RAL 9005 black.

Medium pressure (40 bar) 4-stage pumping unit

Aluminum monoblock
Forced lubrication with low-pressure gear pump
Final safety valve
Pipes, fittings and nuts made of AISI 316 stainless steel
Die-cast aluminum connecting rods
Die-cast aluminum cylinders with nicasil barrel coating + cast iron cylinders
Stainless steel stage valves
Forged steel crankshaft
Roller Bearings for intensive work

Electric motor

One of the key parts of the compressor: the motor transfers motion to the pumping unit through the belt. Available on this model is the three-phase electric motor of 11 kW to 15kW.

Stand-alone filter system with Hyperfilter

The filter system, with activated carbon cartridge, is mounted on a stand-alone stand and includes:

Safety valve (variable according to customer’s request)
Pressure holding valve
Separator and filter kit Hyperfilter external
Leg kit
Automatic condensate drain. Removes water from the intermediate separator and the final separator automatically during operation (every 7 minutes).

Electrical cabinet

Motor protection switch.
Autostop + Autostart.
Drainage of the separator between individual stages during compressor operation (standard drainage interval every 15 minutes for a period of 6 seconds).
Interstage pressure gauges display the operating pressure for individual compression stages. This pressure information allows the tightness of the valves (inlet and outlet) of each stage to be checked and potential sources of failure to be quickly identified.

Interstage pressure gauges are mounted in the compressor frame.

Frame

The best for you,
the best for your work

The compressors Booster prove it: the best possible machine is the one that meets the specific needs of “that” customer, customizing the answer in terms of reliability and performance. Whether we are talking about air, helium, hydrogen, nitrogen, the customer comes before the solution-this is our “credo.”

Standard Equipment

Double filter system Hyperfilter PED certified

Condensate separation system

Frame color Black RAL 9005

Technical specifications.

Type of gas

Air – Nitrogen

Suction pressure

Min. 2 bar Max. 8 bar

Pressure rating

40 bar

Operating pressure

80 bar

Allowable temperature range

-10° C ÷ +40° C

Maximum allowed inclination

15°

Design

Open

Operating voltage, standard

400 V, 50 Hz

Other operating voltages

On three-phase electric motors at 60 hz power (kW / hp) increase by 20%.

230 V, 50 Hz / 440 V, 60 Hz / 230 V, 60 Hz

Oil

Olio sintetico Coltri ST 755

Oil change interval

1 year / 1,000 h

Frame

Steel – Color Black RAL 9005 – Powder coated – Scratch resistant

Compressor

Pump group flow rate

11 KW

From 721 l/min a 2.163 l/min
From 43 m³/h a 130 m³/h
From 25.5 CFM a 76.4 CFM

15 KW

From 901 l/min a 2.703 l/min
From 54 m³/h a 162 m³/h
From 31.9 CFM a 95.5 CFM

Cooling air flow

11 KW

1.570 m³/h

15 KW

1.960 m³/h

Weight

Standard model. Dimensions and weight may vary depending on accessories..

11 KW

225 kg
496 lb

15 KW

225 kg
496 lb

Dimensions

(W x D x H)

115 x 60 x 79,6 cm
45.3 x 23.6 x 31.3 in

Noisiness

Engine

Power

11 KW

11 kW
15 Hp

15 KW

15 kW
20 Hp

Engine type

11 KW

Three-phase electric

15 KW

Three-phase electric

Operating voltage/frequency

Different voltage and frequency available upon request.

11 KW

400 V, 50 Hz

15 KW

400 V, 50 Hz

Rated current

11 KW

23 A

15 KW

31 A

Engine RPM (RPM)

11 KW

2.910

15 KW

2.920

Protection class

IP55

BOOSTER LINE.

Booster Indy VII

Booster medium pressure in a concentrate of power

Simplicity comes as standard

Imagine having a compressor capable of great performance and endowed with extraordinary robustness. What would all this be without absolute simplicity in operating it? We believe that’s what innovation is for: to make it simpler.

The best for you,the best for your work

Standard Equipment

Technical specifications.

Type of gas

Suction pressure

Pressure rating

Operating pressure

Allowable temperature range

Maximum allowed inclination

Design

Operating voltage, standard

Other operating voltages

Oil

Oil change interval

Frame

Compressor

Pump group flow rate

11 KW

15 KW

Cooling air flow

11 KW

15 KW

Weight

11 KW

15 KW

Dimensions

Noisiness

Engine

Power

11 KW

15 KW

Engine type

11 KW

15 KW

Operating voltage/frequency

11 KW

15 KW

Rated current

11 KW

15 KW

Engine RPM (RPM)

11 KW

15 KW

Protection class

Documentation Booster Indy VII

The best for you,
the best for your work