LP 300

Frame: LP 300 Rotary - Line: Nitrox

The LP300 ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on the upper part of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

LP 300

Frame: LP 300 Rotary

Line: Nitrox

Technical drawing

H : 1260 mm - W : 1195 mm - D : 850 mm
H : 49.61 in - W : 47.05 in - D : 33.46 in
Disegno tecnico compressori
LP 300
LP 300

Characteristics

Technical specifications

Drive

Three-phase Electric Motor

Flow rate

2 × - 660 l/m - 39,60 m³/h - 23.31 CFM FAD
O2 32%
1 × - 380 l/m - 22,80 m³/h - 13.42 CFM FAD
O2 36%
1 × - 330 l/m - 19,80 m³/h - 11.65 CFM FAD
O2 40%

Operating pressure

8 bar
116 PSIG

Net weight

256 kg - 564 Lbs

Noise level

68 db
Parti macchina Compressori Coltri
Parti macchina Compressori Coltri
Parti macchina Compressori Coltri
Parti macchina Compressori Coltri
Parti macchina Compressori Coltri
Components
  • 1.
    Frame
  • 2.
    Control pannel
  • 3.
    ON/OFF button
  • 4.
    Electronic control
  • 5.
    Emergency button
  • 6.
    Heater temperature
  • 7.
    Electric motor
  • 8.
    Screw compressor
  • 9.
    Oil fill cap
  • 10.
    Compressor intake filter
  • 11.
    Oil separator filter
  • 12.
    Oil filter
  • 13.
    Oil level indicator
  • 14.
    Heat exchanger
  • 15.
    Membrane protection filters set
  • 16.
    Condensate collection tank
  • 17.
    Oil drain cap
  • 18.
    Heater
  • 19.
    Membrane
  • 20.
    Nitrogen discharge
  • 21.
    Suction filter
  • 22.
    Mixer pipe
  • 23.
    Nitrox output
  • 24.
    Oxygen percentage regulator
  • 25.
    ON/OFF button
  • 26.
    Calibrator
  • 27.
    Membrane oxygen control
  • 28.
    Filter clogging indicator
CircuitoPpressione Compressori Coltri
Components
  • 1.
    Screw compressor
  • 2.
    Dryer
  • 3.
    Separator filters set
  • 4.
    Heater
  • 5.
    Temperature sensor
  • 6.
    Press-thermostat
  • 7.
    Membrane
  • 8.
    Nitrogen discharge
  • 9.
    Aspiration filter
  • 10.
    Air-Oxygen mixer pipe
  • 11.
    Oxygen sensor (remote)
  • 12.
    Nitrox mix output